ATEM Mini - Overlay Lyrics and Graphics

Video quality	The size	Download

Информация о ATEM Mini - Overlay Lyrics and Graphics

Название	:	ATEM Mini - Overlay Lyrics and Graphics
Продолжительность	:	12.59
Дата публикации	:
Просмотров	:	100 rb

While I'm running ProPresenter, OBS and the Atem Control Software on the same computer for this demonstration, I DO NOT recommend doing this in an actual production environment Run ProP and OBS on separate computers You'll probably be fine running the ATEM Control Software along side either of those
Comment from : Ballast Media

very helpful, I appreciate you taking the time to make the video :)
Comment from : Shaun Dickerson

When I'm putting the lyrics in an overlay using either luma or chroma key the lyrics go away every time I switch the cameras if I hit that camera button again they come back, but this leaves a flash at best This is annoying because I don't want to be stuck to one camera shot during praise time Is there a way to get it to leave the lyric overlay up, regardless of what I do with the main cameras until I turn it off? I'm using an ATEM mini Extreme
Comment from : Highland Adventist

thanks Great video
Comment from : ONE81

Hello, brI am having trouble with my multi camera setup I have set up my ATEM mini as you have it in this video and everything works fine until i go to change cameras when i change cameras the lower thirds dissapear and we have to hit the "ON AIR" button on the right to get the lower third lyrics to come back do you have any ideas on what could be causing this?
Comment from : Andrew Counts

great how to video , thank you so much
Comment from : Joey Gonzalez

I get down a bit of a rabbit hole when trying to decide a computer to purchase that could do this I'm not overly tech when it comes to the computer portion We have the atem mini pro up and running and would like to add lyrics What are the specs of your laptop?
Comment from : Trevor Tucker

The information in this video is appreciated Thank you kindly
Comment from : Lex Pro

Hi there I’m using the software called Proclaim How can I create a graphic with alpha channel and gray to create a linear key out of Proclaim I’m trying to make a transparent lower third Is it possible with my computer and software to create a linear key using atem extreme?
Comment from : David Goldschmidt

Looking for a low cost camera option for the Atem Mini Pro switcher Do you have any suggestions? We plan to mount 3 cameras We don’t have the budget yet to buy a camera that we can control the zoom
Comment from : jeffkestner

Hello and thank for your very well explained videos Would you happen to know if this lyric presentation will work with Proclaim? brbrOur church uses Proclaim since it does have the ability to set up volunteer users with ID’s, so they can log in from home to set up each service Since most of our volunteers are young and dont drive and have to wait for parents or some adults get out work late I dont know if Propresenter has that feature yet brbrThank in advance
Comment from : Eddie Samayoa

Thanks very much for this video! I have been looking for this for ages This answers my questions I will be setting this up for my church using Worship Extreme
Comment from : Dara Oladapo

hello sir i want to ask how to set atem mini pro and easyworship for live streaming but the live streaming only uses atem mini pro not using obs please help me sir i really need your help sir thank you sir god bless you sir
Comment from : JEFFAGAMING

Hello sir, do you think it would be possible for me to stream a simple audio visualizer instead of lyrics using the luma keying option?
Comment from : izzetcanoz

Came here after the audio management video for the atem mini, never thought about overlaying lyrics on top of video, always just switched to an alternate input running powerpoint Going to give this a try before my next conference brbrAwesome content man
Comment from : Prendos New Zealand Limited

This is awesome, the end of weeks struggling with lyrics on streamyard, thank you!
Comment from : Juan José Porras Martínez

Thank you for this video,brI wanted to know if you can recommend a camera that works well with low lighting and also good for long distances
Comment from : Pastor David Romelus

Thank you so much!
Comment from : Mount Hope

Clear & concise Thank you for sharing! Keep up the great work You are a blessing!
Comment from : DAndresHDVideos

So appreciate your videos! They are a big help for us setting up our livestreaming in churchbris it possible to this using NDI instead of HDMI port?
Comment from : Miracle Conte

can you add multiple mask in that video switcher?
Comment from : GabakUSA Free computer training

Awesome content! Thank you for all that you do! Blessings!
Comment from : Mike Schmelzer

Is it possible to have lower two third shown on multiple video with only 1 upstream key ?brCam 1 - VideobrCam 2 - VideobrCam 3 - VideobrCam 4 - ProPresenter lower 2/3
Comment from : cchiakl

Hi Praise the Lord I am really thankful to you and God for helping us online learning about Black magic switcher in cameras brThis is Pastor Akashdeep Sharma from India brI need more help I want to start a online TV channel 4 hours everyday for that I am planning to use to black magic 4K and ATEM Mini with overlays logo on prerecorded Sermons, interview and more programs to share Christ On YouTube and Facebook and latter on broadcast TV if you have made any video about this all please share the link with me it's not please help me this is Pastor Akashdeep Sharma from India
Comment from : Visionary Radio and TV Official

Any help We have Atem television studio (not the HD) and Pro Presenteter 6 and doesn't work for us, are we doing something wrong? Thank you
Comment from : stbtuok

Actually understood that that! Thank you so much 😊
Comment from : Bishops Lydeard Benefice UK

How do you connect your lyrics and video showing together on obs I thought you used different capture, so how did you mix the two together from your obs or from your ATEM mini ?????
Comment from : adeyanu praise

My ATEM mini is not being recognized by Camtasia 2020 or OBS the screen looks blankbrThe webcam and Blackmagic show up as optionsbrThe 920E works fine, but eh aTem Mimi is blankbrI have called Blackmagic they say call OBS or CamtasiabrbrCamera brSony brHandycam cx455brNikon D750brbrAny suggestions?
Comment from : NNN MEDIA

Does this process work with Pro Presenter 6? Or do we need to upgrade to the 7 version?
Comment from : Adan Monsibaiz

Best explanation! Thanks
Comment from : Charlie Greenaway

Why my atem mini doesn’t recognized my pc or my latest apple”s laptop so I use pro presenter 7 for the lyrics
Comment from : Peter Emile

When I do the Chroma Key, the hardware buttons do not change the cameras, it just switches lyrics between preview and live/onair
Comment from : Joyal Varghese

Very good! Thank you!
Comment from : Misijas Baptistu draudze

How does it work for animated graphics like title of message or intro logo?
Comment from : Iglesia La Gloria de Dios Internacional

Thank you
Comment from : Alfred Anareta

My pro presenter doesn’t recognize my ATEM mini any ideas?
Comment from : Samuel Darko

New subscriber- thank you for being so concise and thorough when explaining! You are awesome!
Comment from : Amanda Kay

Options without propresenter?
Comment from : Nikodem Kieleczała

You do an outstanding job explaining what is needed Thank you so much
Comment from : ContinuousmotionTV

Super helpful, thanks!
Comment from : Gregory Richardson

Hi I have a question, I’m using chroma key my source is hdmi 4 (PC), hdmi 1,2,3 are cameras, when I turn on Key on the switcher I saw the lyrics but when switch to another camera the Key turn off Can you help me to identify the problem Thanks
Comment from : Mr Dueño

Thanks for this video Just to be clear, this is only for production at the venue If you wanted to live stream all of this, what would you do?
Comment from : Jean Marc Lavoie

Our church streams are about to be on a whole new level!! Thank you and God bless you!!
Comment from : Daniel

can this be done in version 6?
Comment from : Lonzos Studios

Hello, is this tutorial valid also for propresnter V6? Tahnks!
Comment from : fOuTou family channel

When running lyrics from pro presenter and switching between cameras, the lyrics disappear as soon as I switch, how can I fix that?
Comment from : Church Project Querétaro

Thank you for all of your informative videos! What would you recommend to do this with Pro6?
Comment from : Daniel Manning

Best tutorial and explanation on Youtube Really helpful video to mastering the Keying in ATEM Mini Thank you very much!
Comment from : GBI ROCK CITRA RAYA

Hello sir,brI really glad that I´ve seen your videos and I knew that God used you for His glory to work with I thank God so much when I met you here At our church we would like to do that but we have not so much fund for that So we pray for that if God give us to do that as soon as possible Thanks so much
Comment from : Witness Of The Light PW

Thank you for this tutorial Very insightful!
Comment from : Son

Great job! thanks a lot!
Comment from : Crane bird

Can you use the upstream and down stream simultaneously for a logo and lower third?
Comment from : Vive City Chapel

Fantastic video: I currently connect my laptop (ProPresenter) to a 3 way HDMI splitter to connect my laptop to the 3 TVs in the church I will like to replace the 3 way HDMI splitter with a 4 way HDMI splitter so that I can connect the 4th HDMI output in the HDMI splitter to one of HDMI in in the ATEM MINI PRO ISO (installing a multi camera set-up at church for the first time) and want to maintain my current laptop to connect to the ATEM MINI PRO ISO, problem is it only has one HDMI slot Will this work?
Comment from : OA

Purely awesome tutorial and explanation!
Comment from : watchman316ly

Hi
Comment from : 2343 live

Best explanation I’ve seen on YouTubeespecially if you are using pro7 like methanks
Comment from : Randy Staggs

Can you do a short video about overlay using Powerpoint? I know a lot of small church using PPT and can afford to switch to ProPresenter (cost and re-train staff) Thanks
Comment from : Oakland Vietnamese Church

Very informative video We used our for the first time Sunday We had issues Has the audio sync video come out yet?? I noticed Sunday that our video and audio did not line up well at all We tried syphoning our lyrics from Pro 7 The syphon and audio lined up perfectly, but the video lagged behind I am not sure how to fix this really I plan to try NDI tomorrow If that doesn't work, I will go will the settings mentioned in this video I also found a few features that could help lessen the workload on our iMac to hopefully help the lag With that said, our youth ministry uses OBS Streamlabs and the ATEM, and it is synced up well They do not send lyrics though Any ideas on what the issue might be? Do you think we overloaded the cpu running pro 7 and obs causing the video to lag? Do you recommend NDI? We have the ATEM mini pro
Comment from : Grace Community Assembly Of God

That Pro Presenter program should be mention in title, I'm not interested in buying one, that's misleading
Comment from : off greed

What computer you recommend to run OBS and ProPresenter at the same time?
Comment from : Mr Dueño

Hi Stephen, I have a camera connected with an hdmi cable that works only on input 1 But i need it on input 3 the same set up doesn't work on input 2 or 3 4 is already designated for L3's The cable length if 40 ft Thanks
Comment from : Daniel Fuentes

When using the Upstream Key, will the lyrics stay on even when I switch video angles (using multiple cameras)?
Comment from : Hajong Lee

this is by the far the best explanation of exactly what i needed on all of youtube
Comment from : Hajong Lee

Can i use this to our system to broadcast on cable system of ys
Comment from : Jean Mitchel Jarre San Luis

You just changed the game for me Thank you !
Comment from : Gudmrng AM

This is super helpful Thank you! Assuming this same technique works with the Atem TV HD?
Comment from : First UMC Blue Springs

Thanks for sharing Brother Steven What are your thoughts on the Yolo box vs the Atem Mini? Are there advantages with one over the other?
Comment from : Antionyo Reed

These videos have been so helpful in upgrading our video content on a budget Thanks for that! br brOur soundboard, cameras, and media computer are all in the sanctuary, but currently our recording and live stream PCs are in another building My thought was to get the Atem Mini Pro set up in the sanctuary and have our producer just control the Atem from the other buildign using the software But as I've found out, the issue here is that the producer doesn't have access to the multiview monitor (since I can't send the HDMI out signal that far) br brDo you know of any solutions aside from something like a HDMI to fiber converter to send the HDMI out signal a fair distance? Am I just missing something easy within the Atem Mini Pro?
Comment from : T Mills

Great video Stephen, always learn a lot from your content
Comment from : David Overall

Can I use Mediashout6 with OBS and the Atem mini to make Lower thirds? If so, please help!
Comment from : Daniel Fuentes

Good day sir, thanks a lot for your videos and explanations, they are life saverPlease, could you instruct me on how to make my lower third design transparent or how do reduce the opacity of the lower third image design I have designed lower third image that my lyrics will lay on I am using easy worship and the Atem mini to stream directly on Facebook Note I am not using OBS because i could not get the video and audio to sync, so i am streaming to Facebook directly without any software in betweenThanks for your help Eddy/the Netherlands
Comment from : Eddy Isado

Can we see a tutorial on using the atem mini with wire cast one software
Comment from : Forrest Maners

Thank's for sharing
Comment from : Othniel Pollack

How do you do this and still have an output for the confidence monitor?
Comment from : Carl Thomas

Hi Stephen, we are seller on Amazon US We'd like to working with you, it's about Wireless Microphone Are you interested in it? May I have your email? If you'd like to, please email me passyoung70@gmailcom Best Regards,
Comment from : Pass Young

Thanks
Comment from : RC music - ramazan çiftçi

This took too long to upload in regards to the last time you uploaded a video Hope you have been fine?
Comment from : Easyyoke Films

Steven thank you for your video I got my atem mini and a MacBook pro What is the best way to record the video utilizing atem mini to my computer without losing resolution? I tried OBS but i lose a lot of resolution compared to when the video is recorded straight into my camera Your video looks really nice, how did you recorded?
Comment from : Studio 51

Thank you so much for this video It helps clear quite a few things in my headbrI have one question, once the masking technique is used, can the masked overlay be moved around?br(Can the lower third (seen in 11:50) be moved around?brThis is cause we use Easyslides in our church and the output shows the lyrics in center alignment for our local projection I was hoping to mask that and move it to the lower third area for the live stream Is this doable?brIf not, what would you suggest Sir?
Comment from : Allan Benny

can we run with alpha key?
Comment from : Revive India

Following you for couple years by now, watching all videos in original order 😄 but most importantly bought all the hardware as you advised - worth it 👍 you already described in one of your previous videos how to get lower thirds from ProPresenter 6 stage display using OBS to capture the screen and filtering the text with lumakey and mask ( youtube/Bk-B2hCyqas) awesome and elegant solution we really started using during corona streams 🙌brI agree that it would be better to let switcher to overlay the text - almost the same logic like with OBS, using lumakey and mask, but is there a way to change a position of that overlay input with atem mini SW like you did in OBS? Because we actually use that SD output from ProPresenter 6 as a stage display, and these lyrics for lower thirrds are not on that stage display on the same position as we would need it to be when overlaying over live stream camera feed We were able to do that now with OBS as you described before Please advise 🙏 or maybe just let me know if it's not possible without newest ProPresenter 7 😄 thanks :)
Comment from : Igor Polak

I could hug you! This is awesome
Comment from : Joel Goodnough

Hello Mr Steve I just discovered your channel and what a genius Your explanation of the Atem Mini is so knowledgeable Thank you and God bless you for sharing your knowledge
Comment from : Adekola Adebayo