Immersion Cooling an S19 J Pro Bitcoin Miner With Overclock to 130TH!!!

Video quality	The size	Download

Информация о Immersion Cooling an S19 J Pro Bitcoin Miner With Overclock to 130TH!!!

Название	:	Immersion Cooling an S19 J Pro Bitcoin Miner With Overclock to 130TH!!!
Продолжительность	:	8.09
Дата публикации	:
Просмотров	:	65 rb

el liquido de 3M es muy caro, alguna idea para un rig pequeño?
Comment from : Fco javier Criado Lopez

Hello friend, about the thermal paste, could you tell me how long it lasts immersed in the fluid? or how often do I need to change?
Comment from : Calebe Oliveira

Awesome :)
Comment from : krishnan srinivasan

hola buenas tardes alguien sabe como se llama el liquido dieléctrico? y donde puedo comprar?
Comment from : papochaneitor

Hey Nicholas, awesome Video I have a question I trying to run my cooling system with ThermaSafe RTM High Performance Dielectric Heat Transfer Fluid from DCX I use Bitmain Antminer Z15 how do you solve the problem that the thermal paste between the CPU chip and the cooling module is attacked? I heard that you can use some kind of metal foil Iridium Can you please say something about that?
Comment from : Russell Reibold

What type of tubing works best?
Comment from : Gregory Lilly

it's cool, it's just about saving electricity now, and here's an additional fan, not good
Comment from : Mariusz Duda

Overkill 1000 but good job
Comment from : Ross Redman

When you use immersion cooling you have also lower power consumption on basic settings? Is is possible to save few of power consumption? brMy asic will consume 3154w I want to use immersion cooling, and I want downgrade power consumption to 3000w, is it possible?
Comment from : Mr M

Use a 2 stage system and there is no need for the cooling part with 3M fluid!
Comment from : samantha powell

You should have just used a 2xD5 setupbrbrThese pumps are all significantly worse than what dual D5's would do
Comment from : nexxusty

"Spoofers" are just resistorsbrbrThey put a load on the 12v or 5v line the fans use, thus the miner thinks the fans are runningbrbrA bit of solder and 50 cents in resistors would do this job
Comment from : nexxusty

Can you immerse a S19 amlogic board (doesn't have a SD port, it has a micro USB port)
Comment from : ryan ramnath

Do these fan spoofers work on Goldshell Lite models?
Comment from : Joseph Santana

sir if ever i have a hydraulic hose here can i use it as my pipe? instead of finding a proper pipe for dielectric coolant?
Comment from : Carlo The Atheist II

someone probably already explained two things in the design at the end of the presentationbrone - there is no positive pressure for the pump in this design, put it all on legs and put a port near the bottom of the outer tank that drops to the pumpbrtwo and I see this in many designs, don't let the miner tank share a wall with the "hotter liquid" or recovery tank it will just help to heat up the cooler liquid and of course the coolest' liquid is at the bottom of the inner tank, in your later design push the bottom of the outer tank up so the level stays high and that may allow for the aforementioned, higher than the pump port
Comment from : Scott Deryck

Do you have a link to the tank? I've looked on engineering fluids site but apparently my google foo is weak
Comment from : gcbailey34

Niceeeee
Comment from : Tesla ATX

What type of fan are you using to cool the radiator? What cfm, rpm, and watts is it? If you could give me a link for that it would be much appreciated Thanks have a great day!
Comment from : Jim Brinkerhoff