Главная

How to Connect a PS3 controller to an Arduino with a USB host shield and Bluetooth dongle (Part 1)

Кадры How to Connect a PS3 controller to an Arduino with a USB host shield and Bluetooth dongle (Part 1)

Описание How to Connect a PS3 controller to an Arduino with a USB host shield and Bluetooth dongle (Part 1)

Коментарии How to Connect a PS3 controller to an Arduino with a USB host shield and Bluetooth dongle (Part 1)

Hi brother good morning, uncle or need to connect a chinese dualshock ps3 controller on T95max plus android box via 50 dongle (BTL8761B) I should make it through the same steps, I would be grateful for advice 😉 Comment from : M k

Will this work with a controller that comes paired with a dongle??? Comment from : Steve G

I know that the video is old, but if there is someone here, could you tell me if it only works with original PS3 controls or also with generic ones? Comment from : TheRub36

Does this smaller shield work with a arduino mega 2560? Comment from : ECOkey11 F

i get this errorbrWait For Incoming Connection Request br14:48:23816 -> HCI Disconnected from Device br14:48:23816 -> Wait For Incoming Connection Request br14:48:28497 -> PS3 Bluetooth Library Started br14:48:29453 -> Bluetooth Dongle Initialized br14:48:29594 -> HCI Reset complete br14:48:29594 -> Write class of device br14:48:29594 -> Local Bluetooth Address: 00:1A:7D:DA:71:10 br14:48:29594 -> Wait For Incoming Connection Request br14:48:37291 -> Incoming Connection Request br14:48:37291 -> Remote Name: Pro Controller br14:48:57632 -> Connection Failed: 08 br14:48:57632 -> Connection Failed: 08brhow to resolve this error Comment from : Destiny Archer

its like you did an episode of the dongle Comment from : damarus kissonjer

Who saw batteries at the first look of the channel name😂😂 Comment from : N Kayy

You are obviously highly intelligent and this video is almost 10 years old I'm curious, what are you are doing professionally right now? What kind of degree did you get? Comment from : Mike Sims

Have you ever done it with a ps4 Controller? Comment from : Ryan wilson

i saw someone do this whit an xbox Controller, ordered the host and since i still had a xbox 360 Controller and a working dongle , could i use this with the xbox controller and dongle or do i need to get a ps3 one Comment from : Sergeant Karl

can you do this with nrf24lo1 Comment from : Superunknown

Circuits@Home USB Host Shield v20brbrRetiredbrThis product is no longer available for sale The seller may be offering an improved version or it may be hanging out on the beach, enjoying the retired lifebrNow what? Comment from : Amellia Mendel

Because i don't find ps3 controller with bluetooth dongle Comment from : Bhavik Patel

Can we use any bluetooth dongle or we have to use any particular dongle for this Comment from : Bhavik Patel

hi, I connected my host shield but it is not responding ie the usb is not powering up Comment from : l mitun

What is the use of this board? Can anyone tell me? Comment from : Professor

how many controllers have you used n proximity of each other, "does one controller affect other controllers with different mac adresses?" Comment from : JC Ouellet

thank you very much Comment from : Carlos Silva

I know it's been a while since this was posted, but I have a very specific 3rd party Bluetooth controller that I would like to use with an arduino project Does anyone know how I can get it to work? I would like to trigger a button press to perform a certain task when controlling ws2812b led strips Comment from : BLUEFEATHEREDOLIVES

Dude you need to start playing games Comment from : Navdeep Singh

hello friend could you help me, I have this error when trying to compile the code "OSC did not start" could you help me in advance thank you very much Comment from : hung nguyen

Hi could anyone tell me if I could use a wired controller with the USB host shield Comment from : Brad Jansen

Very helpful, thanks for sharing Comment from : Gary McKinnon

Hey Barrett its me again I've already gotten all the hardware required but the problem now is after i upload the code to the arduino, nothing pops out In your video after you upload the code to your arduino a window will pop up with information regarding the bluetooth address and whatsoever but for mine nothing happens its like the code gets uploaded but it just stays there nothings happening would really appreciate it if you could help Oh yea Btw I've already enabled the uhs debugging but still no avail Thanks Comment from : Mah Shang-Peng

can you use a 3rd party remote or does it half to be an original Comment from : Don Reichert

If it all works however my controller doesn't connect, is it the controllers fault? Comment from : Sir Wamby

How do you get that window to pop up? Comment from : Sir Wamby

i only get the message "bluetooth library started" and after that noting does that mean that my usb shield is broken? Comment from : clypeum

Why exactly it you can't connect the PS3 controller via HC-05 module? Comment from : RM

Hey man its good info you got here, I have a issue with my setup I am using a duelshock 4 controller and I can get it connected and piarred once in a great while, What might the issue be? And half the times I get a D1 code error Comment from : Sub Dee

you got ripped off New original dualshock3 costs 40$ and you have a fake one whitch costs max 20$ Comment from : Bartku Namai

Can this be done without going through the USB shield and just using the USB type B on the chip? Comment from : RomanticApplePie

Hi, everytime i turn on the arduino and want to connect to ps3 again, do i need to repeat all those proses (unplug bluetooth dongle & plugging the cable etc) ? Or do i only need to setup once, and next time i turn on arduino, ps3 will automatically connected ? Comment from : claystudiofx

Got errors when compiling PS3BT example I think it's kind of overflow or something like that (I'm not sure since I don't have my arduino with me right now) Comment from : aragami16

I get the BT Dongle info when i plug it in, but when i take the dongle out and plug the PS3 controller in, nothing happens? Comment from : Torvaldur Joensen

any idea if any Chinese USB host shields will work with the library? Comment from : awesley92

Hey Jerome, I was just wandering weather i can use this to control my quadcopter with my PS3 Controller Do you think it would work? Thanks in advance Comment from : Rohith Kyla

Why doesn't my (same as yours) BT dongle light up when I plug the whole assembly into PC? brAnd PS3BT example displays "Error compiling" message ((( Comment from : Harlequin43

Once I'm running the code on the arduino, It's showing on the monitor serie "PS3 Bluetooth Library started" but it's not showing me the Dongle information, I bought one which is working with the arduino and the shield, but it's not showing me anything about the dongle, do you know what could be the problem? Comment from : Jerome Fernando

can i use the dongle of my mouse Comment from : Zhe Ying Chin

will it work with the wireless mouse usb receiver Comment from : Mr Green

hello help pls, i am thinking of making an electric long board with an arduino in there so i can have a custom remote, i was wondering with this sheild if i could use a mouse, and remodel the shape of the mouse, keeping att the wiring the same , so for the pc it knows no difference but for me it a more ergonomic handle, any way i was wondering if i could set scroll wheel up and down to speed, pls reply any help and or problems there are with this idea, thanks to any helpful replies Comment from : Alistair Kapp

how do you control more than one motor? Comment from : George Goodfellow

Nice vídeo! I want to do a quadcopter controlled by the ps3 controler Do you think that i can use it for this project? i am talking about the scope Comment from : David Quinco

sir I want to control a quadruped with my ps3 controller after pairing it with arduino usb hostbut My connection seizes for 5 to 6 seconds when I press a button and also I get repeated same button pressed in my serial monitor please help Comment from : Shubhankar Das

haaa,, i forgot, i have the sainsmart usb host shield Comment from : Angel Del barrio RD

hi, i have a problem whith my conecction i can never join the ps3 control and arduino i upload the librery from arduino, but never get join, the led number 1 never is on only can you help me? Comment from : Angel Del barrio RD

Im looking for a proper bluetooth dongle with decent range (at least 10 meters) Trying to do the same thing (use an arduino board uno with host shield, a ps3 controller, and a dongle) Any recommendations? Comment from : Matthew Wong

hi! did you made a pwm with the analogs??? Comment from : miguel cruz lopez

Can I connect it via wire without bluetooth? Comment from : overlord

Nice I am still waiting for more tutorial videos with arduinoThank you Comment from : Long Lương

Try to work it with HC-05 Comment from : Gursehaj Singh Arora

HC-05 can act as Master or Host Comment from : Gursehaj Singh Arora

hi brI need help Im trying to make tracked robot controlled by arduino with usb shield and a ps3 controllerproblem was it only works when arduino board is plug into pc or latopI need to make it stand alone and externally powered by batteriesbrbrthanks Comment from : AKROMA

every thing works except L2 and R2 Why !! Comment from : mohamed Sami

Hi Barrett, I'm having problems to upload this example to my Arduino, the problem is that the sketch binary is too big! I'm using the Arduino Leonardo, could you help me please? Comment from : Denis Eduardo Donadon Torres

Barrett Anderies Can you please tell me how to send signals via arduino to PS3 or Xbox 360 controller to make the motors vibrate? Comment from : Vickylance

I only have the line of 'PS3 Bluetooth Library Started' My serial monitor doesnt show the lines below that Help! :( Comment from : Jayven Phang Jun Wei

Have You figured out the code how to activate the rumble motor in the Ps3? Comment from : Tor Johansen

Thats not the only place to get the Sheilds as well as the Bluetooth Dongle Comment from : Project Howe

Would this work with a Arduino Pro Mini with an mini usb host shield? like this :  wwwcircuitsathomecom/wp/wp-content/uploads/2012/02/UHSM_matingjpgbrSize matter :-), the pro mini has 6 pwm outputs Do the mini have enough memory ? 16kB compared to the Uno's 32 kBbrThe ATmega168 has 16 KB of flash memory for storing code (of which 2 KB is used for the bootloader) It has 1 KB of SRAM and 512 bytes of EEPROM Comment from : Tor Johansen

my name is b*************/b Comment from : SpiderKidoesMinecraft

does this work for arduino adk for android ??  Comment from : Hung Dang

Hello! I'm really new here and I'd just like to know what's the difference between the USB Host Shield you use in the video and Arduino's USB Host Shield? Comment from : Shazril Bakti

That's pretty cool! Comment from : vampifrog

Awesome tutorial, everything I was looking forbrThanks Comment from : MalucoDivino

Thank you for this video! It is excellent !  But i tried to use "ADK Shield Module For Android Rev 23" and "another BT dongle" And Error occurred! These are the massages:br  PS3 Bluetooth Library Startedbr  Unknown Device Connected - VID: 0A5C PID: 21E8br  BTD Init Failed, error code: 209brSir, is it possible you tell me if  i used the wrong  "Shield" or i have to you the  "Dongle you suggested"?   I appreciate Comment from : K H

This is my little project, a lot of credit goes to you Click the link below:brRambot in action Comment from : Param S

Excellent tutorial I am really impressed by the details shown It was easy peezy! However, this library is useless for UNO as there is no space left to do any programming Is there a way to reduce the size of library? Otherwise, I'll buy Mega Comment from : Param S

I'm getting a OSC did not start error Anyone help? Comment from : Michael Shu

So when I try to run the PS3BT example I get a message no matching function for call to 'PS3BT::getAnalogButton(Button)'  Any suggestions?  I have the Sparkfun board and when I run the example from the older library, I can get the PS3 controller to sync up and runbrbrAlso, I am wondering is this will be able to be run the Arduino Wireless Proto Shiled with an XBee on this as well as the USB host board running the PS3BT   Comment from : Thomas Love

How do you start PS3BT library? Comment from : 69greeninja

Thank you for this video! It definitely pointed me in the right direction! But my USB host shield has no outer female sockets like yours does, will that still work?  Comment from : Tyler Bartolome

I wanna make a remote control for my rc helicopter withdoes anyone have a video for that Comment from : domo amadi

thanks for such useful videofrom egypt :D Comment from : sam jhone

awesome dude !! Comment from : Mrfrankism

you plug it in the controller in the ps3 and it resets Comment from : Isak Landén

would be possible to spend all the programming you did is that I am still a rookie? thanks Comment from : Jeferson Stipp

Would it be possible to do this for a different board and programming language?brI have a Servopod board from new micros and can program using isomax Do you know of a library that works for this programming language? Comment from : Chris Beale

The address is hardware dependent on the controller, not on the dongle  If you had the address 01:23:45:67:89:10 The first three bytes, 01:23:45, are specific to the manufacturer  The last three, 67:89:10, are specific to the device Comment from : Andrew Beaver

instead of usb bluetooth dongle * Comment from : Lazăr Adrian

can i use a wi-fi usb receiver instead of usb dongle ? Comment from : Lazăr Adrian

Thx for reply I'll give it another go and see what happens Comment from : Justin Waggoner

If you plug your controller into the shield after having plugged in your Bluetooth dongle, the shield will automatically program the controller to the right address However, since you can't see the debug information, you won't be able to tell if your shield recognized your dongle, which is a problem I think your only viable option is to enable debugging in the code Unfortunately this will make the sketch too large to fit on an UNO Comment from : Barrett Anderies

The Eleven is advertised as "100 Arduino Uno Compatible", so unless they're lying, yes Comment from : Barrett Anderies

Похожие на How to Connect a PS3 controller to an Arduino with a USB host shield and Bluetooth dongle (Part 1) видео

How to Connect a PS3 controller to an Arduino with a USB host shield and Bluetooth dongle (Part 2) РѕС‚ : Barrett Anderies Download Full Episodes | The Most Watched videos of all time

Control an RC car with a PS3 controller, Arduino UNO, USB host shield and Bluetooth dongle (Part 2) РѕС‚ : Barrett Anderies Download Full Episodes | The Most Watched videos of all time

RC tank control with arduino uno + usb shield + bluetooth dongle + xbox one s controller РѕС‚ : Gizmo with arduino Download Full Episodes | The Most Watched videos of all time

Arduino projects + Dongle Bluetooth + Servo Control PS3 РѕС‚ : Electroingenio Download Full Episodes | The Most Watched videos of all time

Coconut Wifi 4G Dongle with All sim Support Review | Best 4g wifi dongle for all sim In India РѕС‚ : Bhargab Vlogs u0026 Reviews Download Full Episodes | The Most Watched videos of all time

Arduino CNC Shield Tutorial - Control Stepper Motors using CNC Shield V3.0 РѕС‚ : Superb Tech Download Full Episodes | The Most Watched videos of all time

Bluetooth PS3 Controller+Arduino- Animatronic Wheatley v2.0 РѕС‚ : 24 - 7 - testing Download Full Episodes | The Most Watched videos of all time

How to Connect PS4 Controller to PC Wireless/Wired/Bluetooth | How to Use PS4 controller on PC РѕС‚ : shogoz Download Full Episodes | The Most Watched videos of all time

PS4 Jailbreak 7.55 8.03 8.50 8.52 9.00 through Arabic Host | Stable u0026 Simple Host | Free PS4 Games РѕС‚ : Console Gaming Indian Download Full Episodes | The Most Watched videos of all time

How To Connect PS3 Wireless Controller To Android Device (Bluetooth Pair) РѕС‚ : DeMoKiT Download Full Episodes | The Most Watched videos of all time