Do 1-to-4 GPU Risers Actually Work? (aka PCIe Splitter Cards)

Video quality	The size	Download

Информация о Do 1-to-4 GPU Risers Actually Work? (aka PCIe Splitter Cards)

Название	:	Do 1-to-4 GPU Risers Actually Work? (aka PCIe Splitter Cards)
Продолжительность	:	9.55
Дата публикации	:
Просмотров	:	98 rb

How did you build your rig
Comment from : @sedosify

would this work for connecting multiple different kinds of cards? I need to connect to a bunch of legacy devices, so need things like serial/parallel, and 1394 could I run all of them off one of these splitters?
Comment from : @CavalloDiSpade

Ah god crypto :/
Comment from : @DarianDraught98

I'm not able to get my pc to post after installing one of these in my mobo
Comment from : @mrjonesyyy

They can work like this - youtube/mWzlP42jhDI
Comment from : @mango_z

Can you use this for 3d rendering?
Comment from : @moisesmartinez3134

can you se completely different video cards? would thy work together one video card or do you need to use the same exact cards for them to work as one video card?
Comment from : @3eezie483

does that need a dedicated slot or you can put it in into a standard PCe slot
Comment from : @mikser6666

Can you install lane card or audio card to it?
Comment from : @OrientalStories

Slot multiple adapter adapter
Comment from : @abinaslimbu3057

Comment from : @theicongamer1127

Legend you just saved me near $600 on setting up a whole new rig Used the exact parts and miner i was using and i got the answer i needed Thanks much mate
Comment from : @aranh7733

Seb can you assign different miners to different cards to mine several different crypto on the same rig in windows 10?
Comment from : @fuzzyharold

Great Information
Comment from : @sleepezwithjamieyoursleepc8868

hello just start learning to mining , my motherboard was PCle 30 Gpu support only is it possible fit into Pcle 40 Gpu?
Comment from : @limbengchiun8200

Will the splitter work in an x1 slot?
Comment from : @jamesk3022

with the x4 i cannot reach 2400 mem on 3080 in lunix, cards crash, but direct to the mobo is ok any suggest ? ty
Comment from : @nwcordi

So No gaming huh? Or I should say no multi GPU rendering in Blender
Comment from : @MarkSinister

Can I use splitter on DDR3 mother board?
Comment from : @danidtirkey249

is that a mixxed branded rig man?
Comment from : @johnmcneely6967

nice choons 😀
Comment from : @ENZEEVIDS

hi just wanted to ask some questions guys is it ok if i have 6 gpus in my system and play games while mining
Comment from : @enricojeromemorales2581

can use more than 1 PCIe Splitter Cards in one mobo ?
Comment from : @idcadangan8138

Just ordered me one this morning, should be here tomorrow
Comment from : @gregs185

I am thinking to extend one of pcie slot because it is already occupied with Nvidia GTX 660 I want to add NVME SSD on Mobo What should I do ?
Comment from : @awaisiqbal8934

Any idea on how to securely install it? I find it a bit wobbly and fear that the slightest touch on the USB cable could tip it over
Comment from : @spectr49

Was this system reliable?
Comment from : @sealifett8395

Hello! Just wondering if you think it would be a good idea to have a 1-to-4 GPU Splitter temporarily or permanently
Comment from : @heribertovillanueva1679

Iknow this is old i have one and wondered if it was PSU issues due to extra 3 cards or if the MB and Processor could handle the extra 3 cards Were you able to fill the board with 11 GPUS or just original 8 on the board already??
Comment from : @aaronbriley28

so you still need to psu the gpu???
Comment from : @slobodanvukasin1658

Hey Dude do you have installed a driver for this card?
Comment from : @philipp8447

Hi , your video is very helpful brI have some questions bris your motherboard still running with this pcie splitter ?( How many months past still running after installing) brBecause I saw in some forum , someone burn thier motherboard after one month of running 😅
Comment from : @imranm6918

Thanks for yourvideos, Let me ask you something, I am trying to connect 6 GPUs in two different motherboards, but in both it only recognizes 4, I cannot activate the last 2 PCIs slots, the Motherboards are: brGigabyte ga-z77x-d3h brMSI B450 AS pro Max brDo you know of any additional settings in the BIOS or OS? Really appresiate your help
Comment from : @jorgearbelaezzrii9653

Hey! nice video system being laggy might be Windows related have you tried it with HiveOS? if so please share your experience thanks!
Comment from : @neenus

I am using two of these on a AMD b550 motherboard I was trying to get 2- RX5700 and 2- RX580 mining with bios mods I ran into some trouble doing the bios mods in hiveOS I had switched the usb cables around as I was having trouble getting the rig to post Hive seemed to confused the gpu order i think because of these boards, and flashed the wrong bios to the wrong cards even though it looked right in the GUIkind of a major hive bug Now I am trying to unbrick these 4 GPUs totally bummed So watch out for that if using these when bios modding
Comment from : @sudo936

Nice to know they works Running out of pcie lanes
Comment from : @catgod5662

Hi - do you have an updated link for the risers you use? and for the pci-e splitter? Thanks
Comment from : @markyfbaby

Oh I have the same monitor as you, except I use it as my second display
Comment from : @Zaptosis

Kyoto Grass is the best!!!!
Comment from : @seanpetersen8044

Hi Great video thanks!! brI wonder if you modified any parameter in the motherboard bios? thanks
Comment from : @jdlsantos00

I use this for RTX 3060 but it doesnt work
Comment from : @rahmatapandi1902

what splitter cables you use? too many faulty ones on amazon
Comment from : @beatprocess

It works of course I use that splitter for a while now
Comment from : @yragzenitram2965

Bra grejer mannen!
Comment from : @broo994

I know this video is a little bit old but I managed to build a 10 RTX 3060 ti LHR rig with two of this at full capacity brMOBO: ROG STRIX B450-F GAMING IIbrCPU: Athlon 3000gbrRAM: hyperx 4gb 2666 mhzbrPeople told me that this couldn't be done with an Athlon 3000g as it only supports 6 pcie lanes, but I had no trouble in the process I don't remember exactly what BIOS settings I changed, but I tried to disable everything like SATA ports, HD audio, etc and enabled 4g decoding
Comment from : @TOBTOB92

How about the shares ? Do you take the same amount of shares after using the splitter ?
Comment from : @georgepapas852

Can you put the link for the gpu splitters , because on Amazon i found some but all of them have bad quality Thanks and good work!
Comment from : @miningfattoincasa6499

Great Test Seb!! cheers from Brazil!!!
Comment from : @jcmecatronica

Très bonne vidéo merci, merci pour la démonstration, je suis très content d'apprendre ça je compte bien moi aussi en profiter rapidement sur mon rig
Comment from : @mathieumilot1322

Hi guys! In what slot is advised to plug in the splitters? Does it matter if I plug it in the 16x, or it will work fine in the 1x slot as well?
Comment from : @gyorgymuller5060

Thanks for this video!
Comment from : @virkgale

Is it stable ?
Comment from : @samimohammad8628

What if I am using HiveOS on Linux? Would I need to flash a driver update or anything like that?
Comment from : @JonyPro

Hello Séb brHopefully you will be redingote this comment brHow many gpu can a h110 pro btc support med by adding splitter Is there any limit even with splitter?
Comment from : @mounkailadourfayemounkaila1009

Hi i have lenovo ideapad 320 i7 7th gen laptop pci express x4 Gen3 is it my laptop can support external graphic card RTX 3080 plz any one can help me
Comment from : @syedazhar617

Amazing , very helpful like always
Comment from : @ahmadjibawi8535

Love this community, I’m only doing a couple extra cards off on mbo this is so so so rad
Comment from : @northeastriot-calvincline6243

hi brdo you recommended are you happy with them for long time ? so I'm going to buy brbrthanks
Comment from : @diacodrone

it works actually But there is a pcie 4x version i would recommend splitting into 2 with a 1x one while splitting into 4 with a 4x one
Comment from : @petercklauhk

Has anyone tried this with 3090s? Im a bit concerned regarding power consumption Talkim about power trough riser ofcourse :) brAnyone tested that before?
Comment from : @Bostiful

new to your channel, great video!
Comment from : @user-td1sl5wn3y

does the riser also take power connection or just power from the gpu
Comment from : @TheMustangStampede

do those extra fans blow air onto the gpu's or away from them? thanks!
Comment from : @brianhuber194

So I got one of these splitter After adding the second GPU after 30 min my screeen went black
Comment from : @kevinzheng7944

Subscribed
Comment from : @zakariaibnkowsar9720

No background music please !!!
Comment from : @the_realist

Does this work on HiveOs also please ?
Comment from : @Jh_pek

can u tell me clock setting and memory as i am not getting more than 298 hash on 1660super INNO3D
Comment from : @FIREGTX

can i use pcie spliter on hive os?
Comment from : @AMTECH69

What PSU are u using?
Comment from : @ansabnazeer405

I'm having an issue with one of these x1 to 4usb splitters, it will recognize 1 card but anything after that I get nothing inn device manager The fans do spin though on the card it is not recognizing Any suggestions?
Comment from : @notjamesdood

8gpu with 2 spliter work?
Comment from : @kakakadzriel3157

Mix amd with it brbr30series and 20series and 6000 series and 5000 series and see if it works
Comment from : @aravindraja8034

should depends on how many pcie lanes the CPU has
Comment from : @borischan5252

Yo Seb brI have so many questions brWho’s this RGB MIKE? 🤣
Comment from : @ascalone2193

Do I need to change anything in bios for this to work?
Comment from : @bustablocks1242

Do these still work? curios if you are still using them Thanks for the great content!
Comment from : @TheGaginator

I was just about to buy some of these but i was not sure they would work, i found this video very helpful and i have decided i will be buying them, thank you for the video dude :) keep it up
Comment from : @LeoHashCoin

hey sebsis it safe to use this on my motherboard and safe for graphics cards?!
Comment from : @buildtechnaren7682

Grym info, så fort jag söker på info angående mining kommer du upp! Bra info som alltid!
Comment from : @johangidlof6905

why not put 8 splitters for a 32 gpu rig?
Comment from : @topstarnec

you should try 1 to 7 risers
Comment from : @cyborg6294

You the man Seb!!
Comment from : @Nutakins

thx man! good work!
Comment from : @BOSANAC2048

Would be interested to know if they work using HiveOS tooI imagine they would but just curious,
Comment from : @livingourdestiny9075

my man!!!
Comment from : @baf344

So potentially the cards can draw 300w (4x 75w) of power from one pci-e slot Isn't the pci-e slot limited to 75w?
Comment from : @retro2vr

if i have 6 pcie lines i can put 6 adapters or is there a limit? because potentially each Splitter would only occupy 1 pcie line
Comment from : @andreatiozzo480

I am using Biostar TB360-BTC pro 20 and MSI Geforce GTX 1660ti GPUs But Issue is windows not det vting the GPUs Any idea how to resolve the issue I tried updating the bios
Comment from : @sibishrajan

New to your channel you got 1 sub man ❤️
Comment from : @saneejahamed8184

Wait but there must be a limit to this 1-4 riser right, coz if not you could have one of those mining boards and that splitter on each, that would be like 30 - 40 gpu's per rig, even if you had that luch cpu lanes
Comment from : @eternablue730