Keurig Breville Fix to slow brew and partial cup

Video quality	The size	Download

Информация о Keurig Breville Fix to slow brew and partial cup

Название	:	Keurig Breville Fix to slow brew and partial cup
Продолжительность	:	7.23
Дата публикации	:
Просмотров	:	399 rb

This is my 2nd Keurig coffee maker of this model wwwyoutubecom/post/UgkxBrV-RbF5Nk0Rlt9i15aao-YMzqzTG8Vf The first worked fine for more than 2 years, and I could still get a decent cup of coffee out of it if I fiddled with it when I decided to replace it The problem I had with my first unit was this: When attempting to brew a cup of coffee, the unit would either keep brewing until the coffee was undrinkable or it would not run long enough and the coffee produced was way too strong I cleaned the unit as best I could but it did not help So in the end it was just too much trouble to get a good cup of coffee out of it, so I decided to replace it with a new one, which has been working great since I unpacked it
Comment from : Alicia Waller

Make sure you put the silicone tube all the way on the pump up to the base when reassembling If not, the inlet tank seal for the water tank will not seal off correctly as the sealing base will not align correctly with the tank outlet stub, and it will leak Ask me how I know 1 do over Thanks for the video Fixed the problem that I've had for some time
Comment from : Ralph McClary

Had the exact problem you describe and did exactly what you said 30 minutes later my 10 year old Breville (aka: expensive) coffee maker was making cups-full just like when it was brand new The best part was it went from very noisy to very quiet THANK YOU!
Comment from : Tainsha Binnez

Woohoo I have also found a product called Kup-Lift to stop that annoying splashing
Comment from : Sam Geragonis

Mine runs slow when I use a coffee pod But when I use and empty coffee pod or run it without a pod it works fine I’m stumped
Comment from : June June

It works!!!!
Comment from : Herbsurburb

Old video but great and currently effective It took years for my breville to need this done, but I use my Britta to fill my reservoir so maybe that and the included water filter in the tank helped to prevent this from happening sooner Thank you for saving my from having to pay a service to fix or replace my breville, I love my Breville products, now to find a solution to my kettle taking so long to heat up ;)
Comment from : CDN Adrian

Great vid !! also , depending what kind of maker you have , there is a needle( below in in a removal cup assembly , it might have a little rubber sleeve around it be careful it slides off from the top of the needle ) i found a peace of debris in it and cleared it with a paper clip , now i get a full cup of coffee , this is after i tried meany other fixes first , it was probably the most easy one i tried , ( KISS !!!! ) KEEP IT SIMPLE STUPID !!! i did not follow my own advise
Comment from : larry h

This worked perfectly! thanks for taking time to make the video
Comment from : Jean B Parker

Thanks for you're wonderful video Before taking your machine apart, you should try cleaning the filter using two Q-tips (four sides) for each quadrant of the filter For me, that was adequate enough to unclog my filter and get my Breville K-cup machine back to normal operations
Comment from : Stephen Rose

I thought my trusty coffee machine was done I watched this video and I fixed it on my own and it now works perfectly again Thank you so much for taking the time to do this video Extremely valuable!
Comment from : John Cardella

08-12-2019 Thanks so much for your simple instructions on repairing my Keurig Breville coffee maker Mine is now working fine following three times descaling This makes the second one I have purchased If I had seen your video before purchasing the last one I could have saved $25000 plus the taxes Thanks so much for your time making this video I am sure it has helped several people in restoring their coffee maker back to working well
Comment from : Tom Phillips

You, sir, are a genius Saved my 10 year old B60 Coffee for another day! Thank you
Comment from : odonusa007

Thanks, this fixed my issue, too!
Comment from : Tricia Akins

This did the trick I had purchased the descaler and it worked good only when it was only water But I followed your directions and it was pretty easy Amazing the black junk in the rubber hoses Not really seeing it but I used a Q tip, several and cleaned all of them And it is working great Thanks for saving me another $130 Next time I will buy a single cup Thank You
Comment from : Kathy Thompson

Ours has been in the cabinet for over a year Tried this today and it worked! It was nasty as hell! I cleaned each part with hot water, soap and paper towels and a small soft hose cleaner Ran it twice to see if it worked and both times perfect like old times! THANKS!!
Comment from : Ed D King

I have the same problem, but the filter was clean so I still have problem
Comment from : P M

My Kerrigan is leaking under what do I do?
Comment from : Pauline Richard

finally, a real solution, as opposed to the worthless videos of mcginestines simply running white vinegar through it thank you
Comment from : icawn

GREAT TIPS! (NOTE, it’s more of a screen in the filter FYI ;)
Comment from : Sean Pendrak

HELP! I did this Now my Breville is leaking a ton of water!
Comment from : Michelle Tink

Thank you!!
Comment from : Michelle Tink

I wish you showed how to get the back of unit off I don't want to break plastic tabs I cleaned filter and hose Thanks for that However when I take the bottom off of unit I can see 2 hoses that are moldy One the intake and filter hose which you show The other one is attached to maybe a motor with zip ties I would like to get to that one too, its moldy on mine
Comment from : Rob Towne

This was the magic Bullet Thank YOU
Comment from : A T

Thank you for the video! I need to replace my air pump and for the life of me I can't figure out how to get to the top screws to pull the back cover off Can you please throw me a tip? Thank You!
Comment from : drew122981

Your video was very helpful!!! I have been trying to fix my Keurig for several days now and nothing works until I saw your video I took out the filter which BTW was clogged, cleaned it thoroughly and re-assemble Now it works like new! thank you so very much
Comment from : Ralph Piansay

Works like a charm! Quick and easy Thought I was going to have to purchase a new one, but not now
Comment from : Annette Trujillo

Very useful video Can you tell me how you removed the back panel off? I can't seem to figure out what screws need to be removed to get the back panel off Thanks in advance!
Comment from : Vik Kumar

Worked for us! Thanks!!
Comment from : phbcanada

Thanks, you just saved me $100 ,I love these You Tube video's
Comment from : Pat Ogley

i vacum my filter instead of takeing it out
Comment from : Christian Weller

Related model numbers tags BKC600XL BKC700XL
Comment from : MenesesInc

Just tried this and it worked! Thank you so much!
Comment from : tareli

Nice work! Also works for Cuisinart brand machine
Comment from : Nick Foxcroft

Up and Running Buddy !
Comment from : demoking1422

thanks worked great
Comment from : hillbilly flyer

Cleaning that and the other filters didn't quite do the trick until I got mad, lifted my keurig machine up and dropped it less than a few inches off the counter Works great now! I recommend everyone tries a little bit of brute force on these suckers if they give you trouble
Comment from : Donkey Kong 64 Instruction Booklet

Hey fuck boy what's wrong with ur camera
Comment from : Rj Mtx

Thank you! Before your video, I did the vinegar solution cleaner and would still get a slow drip and not even a 1/4 of a cup of coffee would make This helped a lot!
Comment from : Nancy Trevino

Thanks for your video I applied what I learned on your video to my K75 Platinum Keurig brewer and cleaned out all the gunk and it works like a champ It would take forever to brew a cup of coffee and it was only dispensing about 7 oz of coffee instead of 12 oz Thanks again
Comment from : Pgonzo8798

Thanks! Just used your video to fix my Mr Coffee Kurig I think I actually fixed it by blowing canned air through it, but when I did that it actually separated the filter hose from the pump Using this video allowed me to get into it and reconnect everything and now it works again You're awesome my hubby didn't even have to help me And best of allmy son bet me 7500 I couldn't fix it😏
Comment from : Patricia Golightly

IT worked!!! That little filter barely had any scale in it, but as soon as I scrubbed it my problems were solved I literally spent all day yesterday spanking my Keurig platinum and running vinegar through it to no avail Big thanks!!
Comment from : Jacob Kirk

One noticeable design issue is that the needle puncher assembly has a check valve built-in If for some reason coffee grounds make their way up in that check valve (say if the k-cup was under some pressure and the top needle pierced before the bottom one), it'll jam the valve very badly and make the machine unuseable Fortunately, the needle puncher assembly is compatible with the one on the Keurig B60/B70, which use a separate check valve installed inline with the hot water feed line The Keurig outlet check valve however needs more pressure to 'crack open' so it only gives partial cups (6-7oz instead of 8) when installed on the Breville unit, so I'm still looking for a good replacement check valve
Comment from : Patrick M

Thanks! Worked perfectly although my Cuisinart did not exactly come apart I was able to get all the gunk out
Comment from : Teri DiPiano

Thanks! Saved me buying a new brewer Appreciate you doing this
Comment from : amarshalluk

Excellent video Took it apart, cleaned the filter with an old tooth brush, and closed it all up in 20 minutes, including a good clean up I did take my time
Comment from : longueuillois

Good morning, I just watched your video Thank you so much I took mine apart with no problems I did everything just as you did and while I had it upside down, I blew through the end with the filter and could hear the air going through the machine After I removed the end with the clip I took a Qtip and cleaned the inside of these two pieces Just ran several large cups of water through and it worked perfectly No groans or grinding Keeping my fingers crossed Many thanks!
Comment from : T Lowman

This is the one, guys! My water inlet was plugged with a clear jell It didn't look like a clog, but when I cleaned it out, both sides with an old toothbrush, after disassembly per the instructions in this video, it was good as new I just wish I hadn't found this video two days after I bought a replacement Keurig Gotta drink lots of coffee now
Comment from : Stanton McGroarty

Thank you! It works!
Comment from : OhioVR scott

What if yours doesnt have a water depenser i have a small one that does not hold water u put water in everytime you use I dont know how to get to the clog
Comment from : Jess C

Worked flawlessly Now to find a tutorial to help me clean the gunk from refrigerator water! Thanks a lot!
Comment from : Todd McMillin

Thank you! This did the trick
Comment from : Melissa Bickerstaff

Yes ! that fixed it
Comment from : SuperIzzyj

Worked perfectly, thanks dude
Comment from : Jeff Hicklin

THANK YOU THANK YOU THANK YOU THANK YOU!!!!!!
Comment from : Maya Shea

Thanks for the video! I did this with my Keurig and initially it didn't work In my Keurig there's another strainer at the bottom of the inside of the water reservoir, so I took it apart cleaned it and it is working again Note: Both strainers looked clean, but the holes are so tiny you can really tell Clean them and you will see results! Afain, thank you so much, your video save me some money
Comment from : Raul Orellana

Thank you! Just fixed our 4 year Breville -- it is working properly again thanks to your video
Comment from : Shannon Smedstad

Thank you so much! It was really helpful
Comment from : F F

Thank you, thank you, thank you! Worked on my Keurig, works perfectly now :)
Comment from : OMichelle Flick

thanks it works now my keurig 20 what u told me what to do
Comment from : ted brown

On the Breville, be sure to check the 3 holes on the side of the puncture needle in the lid The ½ inch or so rubber grommet pulls off exposing the holes Using a sophisticated tool called a "trombone" (French for paperclip as I just learned) just push it up through the 3 holes and voila! (French for I can't believe that actually worked) Often if it sounds like the heater is filling, but you just get a slow drip this will do the trick You can usually do this by just tipping the whole brewer back
Comment from : btb

Thankyou!! Just watched several videos- yours was the most concise & I loved the "skip to min 6" :) Going to attack the Keurig now!
Comment from : Karen C Mairs

AWESOME video!!!! Thanks I'll give it a shot
Comment from : Rex Landings

I appreciate you uploading this video, thank you so much
Comment from : GUJE67

I wanted to say thank you! That worked and saved me a bunch of money, not having to buy a new machine I appreciate you uploading this video
Comment from : Kenny Rood

Thank you very much You are a genius I have a Keurig B66 and you just saved me money and time Thanks again
Comment from : Geo Figgy

Thank you for sharing It worked!!
Comment from : babylovedolls

Bingo! This video saved my Cuisinart Single Serve SS-700 I pulled off the bottom cover, accessed the filter, removed it and found a big build-up of fiber plugging its underside Maybe the fiber accumulated from the replaceable charcoal filter pack in the water tank Before I found this video a cup of coffee was taking 60-70 seconds to start pouring After 9 seconds! Like new again
Comment from : Bud Mccreadie

Awesome, I did this and it spits out the correct amount But now it leaks from the bottom lol Oh well, I guess I'll keep it around for tinkering
Comment from : Chaos31

This worked wonderful for me! Motor sounds way healthier (cause its getting full water) and it brews like new!
Comment from : ramoth010

Wow Great! Thanks! Works for me brbrI didn't take the tube out A little cramped but less trouble I think brbrAlso, pay attention on the bottom screws--they are diff sizes :)
Comment from : Ambrose Old Account Little

omg thanks so much for this! i thought all hope was lost until i saw this and it WORKED! i thought i had to buy a totally new machine! thx so much!
Comment from : blind foldme

Thanks! I would not have attempted dis-assembly before I found your video Mine was coated with a black slimy film It also coated the screen housing After removing it I cleaned both with vinegar Be careful when reinstalling the filter housing If it's not perfectly centered, it will leak
Comment from : Albert Karoly

My 20 is 2 weeks oldhaving this problem
Comment from : Evan Robert

Thanks for sharing your knowledge This fix worked for me, and it save me from buying a new machine
Comment from : Ra fico

Thanks, Its nice to see how your machine works
Comment from : Michael Wainman

In the Kourig 2 there is a wire mesh strainer above a check valve in the bottom of the plastic reservoir Clean that with a kitchen sink sprayer and try it
Comment from : Peter Costas

THANK YOU, THANK YOU, THANK YOU! I picked up a Keurig B60 at an estate sale for $15 realizing there may be some issues, and there were It was VERY slow to brew and only brewed about 3-4 ounces of liquid no matter what size I had the machine adjusted to I ran white vinegar through it but the same issues remained I tried your tip and within a few minutes I had a machine working perfectly and for only a fraction of the cost of a new machine! I cannot thank you enough for your tips!
Comment from : DJ C

I have been having similar problems with my Breville K-cup machine for quite awhile I usually have to brew two cups in order to get one; however, when I just want hot water, like for hot tea or cocoa, I get a full cup every time So this tells me that the machine is not maintaining enough pressure to force the hot water through the K-cup Do you think that cleaning the filter will fix this problem, or do I have a different problem, such as a malfunctioning air pump? Thanks for your video
Comment from : Arthur Howle

Thank you!
Comment from : sabai206

Thank You, Thank You! My husband and I were ready to buy a new coffee brewer We've had our Keurig for 3 years now and thought well the pump must be bad I searched one last time by searching 'fix Keurig pump' instead of 'cleaning Keurig' and found your video So grateful I didn't give up just yet
Comment from : Katie Blesener

Woke up frustrated, needing coffee and my Keurig was acting up Watched your tutorial and it worked Saved me a ton of money and trip to Bed, Bath and Beyond Thanks Buddy
Comment from : John Smith

Thanks man Took me 15 minutes and runs like new now I always use distilled bottle water so I have no problem with calcium but I suppose after almost 3 years floating dust finally plugged that filter
Comment from : Allan

I did this fix and yet still only brews the 2nd smallest cup of coffee Could there be something I missed? I also descaled my brewer and did the paper clip trick and still the same thing
Comment from : Rachel Schardt

Oh My Gosh This video was a huge help We opened up our machine, found the internal filter, removed it & the algae clogging it Gross, I know, but now it works PERFECT! Thank you so much for posting this video
Comment from : Jo Gandolfi